Instructions - NOVARDEN NSH35s Manuel D'installation Et D'utilisation

EN

Instructions

Symbol Designation
ON/OFF
Up/down
• Switch on heat pump by pressing the ON/OFF button.
• To adjust the temperature, press
select the mode or to defrost the appliance.
• When the heat pump is in automatic defrosting mode "
flashes on the display screen. Once finished, the pump will
automatically resume its heating programme.
NOTE: The interval between two forced defrost cycles must be more than 30
minutes.
Operation
Press to switch the heat pump on or off
Press to adjust the water temperature or select the mode
14
or . Use the arrows to
"