Technical Data - Meec tools 011639 Mode D'emploi

EN
• Use the support handle, if the tool is
supplied with one. Otherwise, you could
lose control of the tool and be injured.
• Hold the power tool by the insulated grips
when working in areas where the tool
may come into contact with concealed
electrical cables or its own power cord.
Contact with a live cable will cause the
metal parts on the tool to also become
live and give the user an electric shock.
REDUCTION OF NOISE AND
VIBRATIONS
• Plan the work so that exposure to heavy
vibrations is spread over a longer period.
• To reduce noise and vibrations when in
use, limit the time the tool is in use, and
use low-power/vibration mode and
suitable safety equipment.
• Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the
purpose.
– Keep a firm grip on the handles/
grips.
– Maintain and lubricate the tool in
accordance with these instructions.
22
SYMBOLS
Read the instructions.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Rated output
Stroke rate
Percussion force
Tool holder
Weight
Cord length
Sound pressure
level, LpA
Sound power level ¹ 103 dB(A), K = 1.56 dB(A)
Sound power level ² 105 dB(A), K = 1.56 dB(A)
Vibration level ³ 18.575 m/s², K = 1.5 m/s²
¹) Measured, LwA
²) Guaranteed, LwA
³) ah, CHeq
Always wear ear protection.
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and
for a preliminary assessment of exposure.
The measurement values have been determined
in accordance with EN 60745-2-6:2010.
230 V ~ 50 Hz
1850 W
3450 /min
60 J
SDS-Max
16 kg
3.5 m
92.9 dB(A), K = 3 dB(A))