Special Safety Instructions - Meec tools 018279 Mode D'emploi

EN
• Do not use the power tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the battery
before making any adjustments, changing
accessories or putting the power tool away.
These safety precautions reduce the risk of
accidentally starting the power tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions,
to use the tool. Power tools are dangerous
if used by inexperienced persons.
• Maintain and take good care of power
tools. Check before use that moving parts
are properly adjusted and do not jam,
and that no parts are damaged. Check for
other factors that could affect the
functionality of the product. Have the
product repaired before using it again.
Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those for
which they are intended to be used.
• Do not use the product if a handle or
safety device is dismantled or damaged.
Do not dismantle the product or attempt
to modify or repair it – risk of personal
injury and/or material damage.
• Look around the work area for potential
risks that you might not notice when the
product is in use.
• Do not use the product when other persons,
especially children, or pets, are in the vicinity.
44
USING AND HANDLING CORDLESS
PRODUCTS
• Only charge the battery with the charger
recommended by the manufacturer.
A charger intended for one type of battery
can result in a fire risk if used with another
type of battery.
• Only use batteries recommended by the
manufacturer. The use of other batteries
can result in a risk of personal injury and/
or fire.
• When the battery is not in use keep it
away from metal objects such as
paper-clips, coins, keys, nails, screws and
other small metal objects that can short
circuit the terminals. Short circuiting
discharges large amounts of energy and
can cause a fire and/or serious personal
injury.
• Failure to handle the battery carefully can
cause fluid to leak from the battery.
Avoid contact with battery fluid. If you
get battery fluid on your skin, rinse
immediately in plenty of fresh water.
If you get battery fluid in your eyes, rinse
your eyes with clean water for at least
10 minutes and then seek medical
attention immediately. Fluid leaking from
the battery can cause irritation or burns.
• Read all the instructions and safety
instructions for the charger and/or battery.
SERVICE
• The power tool must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.

SPECIAL SAFETY INSTRUCTIONS

• Hold the product by the insulated grips
when working in areas where it could
come into contact with concealed cables.
Contact with a live cable will cause the
metal parts on the product to also
become live – risk of electric shock.