Start A Session - Gallagher TW-3 Guide De Démarrage

START A SESSION

When you gather informa on about an animal, it is recorded in a Session. Each
event such as weighing, adds a record to the current session.
Note: It is recommended a new session is opened for a new day's ac vity or for
a new group of animals. An animal cannot appear within the same session more
than once.
To start a new session: from the Home screen, tap
Note: Before weighing,
1. Load the animal onto the pla orm.
2. If required, you can record the animal's Visual Tag Number or scan an
Electronic ID.
3. If weighing in
weight and hold it on the screen un l the animal leaves the pla orm.
If weighing in
When the weight becomes stable, it will lock.
4. Move the animal off the pla orm.
Important: If the weight displayed does not always return to
check for dirt or manure that may have been le on the pla orm.
The TW- can be re-zeroed by pressing
Reminder: For more informa on about this screen or any TW- screen, tap
displayed in the top right corner of the screen.
8
Gallagher TW- Weigh Scale Quick Start Guide
0.0
should be displayed. If not, press
AUTO
- Automa c weight lock, the scale will lock on to the
MAN
- Manual weight lock, you must fi rst press
New
.
To customize the session:
click on the
bu on at the lower le of
the screen. Here you can
set up the weighing mode,
dra ing op ons, traits and
name for the session. Refer
to Session Op ons (p. 9) for
more informa on.
0.0
a er weighing,
.
OPTIONS
.
Weigh
.