Charging The Appliance - Philips VisaPure Advanced Mode D'emploi

Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.
Cleaning the appliance and the brush head
Make sure the appliance is switched off before you start cleaning it.
Rinse the appliance and the brush head thoroughly with water and
mild soap after each use, to ensure optimum performance.
1 Rinse the appliance and the brush head under the tap with warm
water and mild soap (Fig. 12) (max. 40ºC/104ºF).
2 Remove the brush head from the appliance (Fig. 13).
3 Clean the bottom of the brush head and the connection pin of the
appliance under the tap at least once a week (Fig. 14).
4 Dry the brush head and the appliance with a towel.
5 Place the attachment on the storage palette (if you have one) and
leave it to dry. You can also leave the attachment on the handle
placed on the charging stand without the protection cap and leave
it to dry.
Cleaning the adapter and the charging stand
Danger: Always keep the adapter dry. Never rinse it
under the tap or immerse it in water.
1 Make sure the adapter is unplugged when you clean it. Only wipe
it with a dry cloth.
2 Always detach the charging stand from the adapter before you
clean it (Fig. 15).
3 You can clean the charging stand with a moist cloth. Dry the
charging stand before you reconnect it to the adapter (Fig. 16).
Charging

Charging the appliance

Charging the appliance takes approximately 6 hours. A fully charged
appliance can be used for at least 2 weeks without charging.
1 Make sure the appliance is switched off.
15
English