Philips VisaPure Advanced Mode D'emploi page 14

14
English
Note: do not use the brush head on the sensitive skin area around the
eyes.
Tip: if you want to change the rotation direction of your attachment
after you turned on the appliance, you can hold the button until the
rotation direction changes.
Cleansing procedure
1 Push the brush head onto the connection pin until it locks into
position with a click ( ' '). . (Fig. 7)
2 Moisten the brush head with water. Do not use the appliance with
a dry brush head, as this can irritate the skin.
3 Moisten your face with water and apply a cleanser to your face.
4 Place the brush head on your right cheek.
5 Press the on/off button once to switch on the appliance. The
appliance starts to operate at intensity setting 1. If you want to use
intensity setting 2, press the on/off button twice. Press three times
to switch off the appliance or wait until it switches off
automatically (Fig. 8).
6 Gently move the brush head across your skin from the nose
towards the ear.
Tip: Do not push the brush head too hard onto the skin to make sure
the treatment remains comfortable.
7 The face can be divided in different zones. The intelligent skin
zone timer lets you know through a short pause when it is time to
move to the next skin zone.
8 After 15-20 seconds, the appliance pauses briefly to let you know
that you have to move the appliance. Gently move the brush head
from left to right. The appliance stops automatically after it has
completed the program for the entire face.
Note: We advise you to not overdo the cleansing and to not
cleanse any zone longer than 20 seconds.
9 After the treatment, rinse and dry your face.Your face is now ready
for the next step of your daily skincare routine.
10 Clean the brush head with water and mild soap and allow it to dry
properly.