Error Indicators; Voyants D'erreur; Fehlerindikatoren; Foutindicators - Epson STYLUS SX200 Serie Guide Des Operations De Base

Table des Matières

Publicité

Error Indicators

Voyants d'erreur

Fehlerindikatoren

Foutindicators

& 30
R
EN
& 31
R
FR
& 32
R
DE
& 33
R
NL
0
Check the lights on the control panel and the code or letter in the k Copies windows to diagnose the problem.
O = On k = Flashing
Lights/Code
O b
No paper is loaded in the sheet feeder.
Multiple pages have been fed into the sheet feeder.
k b
Paper is jammed.
k B
An ink cartridge is running low on ink.
O B
An ink cartridge is expended or not installed
correctly.
k b
An unsupported memory card is inserted.
k Copies
The memory card does not contain any valid images.
k b
The index sheet was not recognized because it is not
positioned correctly.
k Copies
The index sheet is not marked correctly.
k b
k Copies
The index sheet does not match the photos on the
k b
memory card.
k Copies
An unsupported device (HUB) is connected.
k b
k Copies
An unsupported device is connected.
k b
k Copies
The waste ink pad in the printer is saturated.
k P, O b, O B
k Copies
k All lights
There is a problem with the printer.
k Copies
Cause
Load paper in the sheet feeder.
x Start E [Color] to continue or y Stop to cancel.
Clear the jammed paper.
You can check the ink status from your computer. Obtain a
replacement ink cartridge.
If any cartridge is expended, you cannot print until you
replace it. Replace the ink cartridge.
Remove the memory card.
Position the index sheet correctly on the document table,
aligning the top of it with the right edge of the glass. Then
press x Start E [Color] to continue or y Stop to cancel.
The index sheet was not printed correctly. Print the index
sheet, mark it, and try again.
Remove the index sheet, mark it correctly, and try again.
& 20
R
Remove the memory card and insert the card used to
print the index sheet—or place the correct index sheet on
the document table. Then press x Start E [Color] to
continue or y Stop to cancel.
Remove the HUB.
Remove the connected device or press the y Stop.
Contact your dealer to replace it.
Turn the printer off and then back on. If the error does not
clear, contact your dealer.
Action
& 14 Then press
R
& 39
R
& 34
R
& 18
R
& 20
R

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Stylus tx200 serie

Table des Matières