Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

In order to adjust the doors vertically,
•Loosen the fixing nut at the bottom
•Screw adjusting nut (CW/CCW)
according to the position of the door
•Tighten the fixing nut for the final
position
In order to adjust the doors
horizontally,
• Loosen the fixing bolt on the
top
• Screw the adjusting bolt (CW/
CCW) on the side according to
the position of the door
• Tighten the fixing bolt on the
top for the final position
10
adjusting nut

3.4 Power connection

WARNING:
A
use extension or multi
sockets in power
connection.
WARNING:
B
power cable must be
replaced by Authorized
Service.
When placing two
C
coolers in adjacent
position, leave at least 4
cm distance between the
two units.
Our firm will not assume
responsibility for any damages
due to usage without earthing
and power connection in
compliance with national
regulations.
The power cable plug must
be easily accessible after
installation.
adjusting nut
fixing nut
fixing nut
Do not
Damaged

Publicité

Table des Matières
loading

Table des Matières