Removing The Unit - Kenwood KMM-BT408DAB Mode D'emploi

Installation/Connection
Installing the unit (in-dash mounting)
1
2
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Do the required wiring.
(Page 26)
Dashboard of
your car
Bend the appropriate tabs to hold the sleeve
firmly in place.

Removing the unit

1 Detach the faceplate.
2 Remove the trim plate.
3 Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
25
ENGLISH