Cleaning The Filters; Pre-Motor Filter - Hoover MAXLIFE Guide D'utilisation

Maintenance

Cleaning the Filters

Pre-Motor Filter

To reduce the risk of personal injury, unplug before cleaning or servicing.
Remove the dirt cup
to locate the filter.
1
WARNING
2
5
Use the PULL tab to
remove the filter.
3
Gently squeeze filter
to remove excess
moisture.
24H
6
FILTER MODEL #: AH44010
Separate the foam
filter from the filter
frame.
4
Let foam filter
and frame air dry TIP:
separately for at
Replace filters when heavily discolored.
least 24 hours prior
Set filter frame on its side when drying to
to reassembling and
allow excess moisture to drain off.
reinstalling back
into the vacuum to
ensure the filters
dry completely.
Rinse foam filter
and filter frame
under running
water until all
debris is clear.
11