How To Connect The Earphone; How To Switch On And Adjust The Volume - Beyerdynamic IMS 900 Notice D'utilisation

Important:
• If you do not use the receiver for several weeks or months, please remove the batteries as they can
leak after some time and damage parts of the receiver. Even "leak proof" batteries may leak after
some time. Damage caused by leaking batteries is not covered under warranty.
• Clean the battery contacts from time to time.
• Please do not throw used battery packs away with your household rubbish, but take them to your
local collection points.
• When using rechargeable batteries use conventional chargers.

2.3.3 How to connect the Earphone

Connect the earphone to the mini stereo jack socket (2). You can use any conventional earphone or
any other audio device.
Note:
Connect to the stereo jack socket (2) an earphone with stereo jack only. If you connect an earphone/
headphone with mono jack, a short circuit can occur and damage the earphone/headphone.

2.3.4 How to switch on and adjust the Volume

To switch on the receiver turn the on/off switch (1) on top of the receiver clockwise. As soon as
the receiver is switched on, the power indicator (3) will illuminate and the display (7) indicates the
current channel. The channel indicator (7) goes out after 4 seconds to save power. To increase the
volume continue turning the on/off switch (1) clockwise. To decrease the volume turn the on/off
switch (1) anti-clockwise. The volume can be limited with the limiter switch (10).
34