1.4.2 How to connect the Antenna on the Front
For connecting the antenna on the front of the receiver use the FBC 71 antenna mounting kit.
1.4.3 Remote Antenna Connection
For remote antenna connection use the AD-707A antenna with an MS 10 wall mounting accessory
or microphone stand adapter and a 50Ω coaxial cable. The cable should not be longer than 5
metres.
AD 707A antenna with MS 10 wall mounting
Connection with coaxial cable
1.4.4 How to connect the Power Supply Unit
Connect the power supply unit (DC 12 V - 15 V/1 A) to the transmitter (14) and to the mains.
The power cable can be fastened to the rear panel to prevent the plug from dislodging.
1.4.5 How to switch on the Transmitter
When the SE 900 transmitter is connected to the mains, switch on the power switch (1). The green
LC-Display (6) will illuminate.
1.4.6 Line Level Input
A balanced or unbalanced line level input can be connected to the 3-pin XLR socket and an unbalanced
line level input can be connected to the 6.35 mm jack socket. This refers to the left and right channel.
28