Spaceplus Ice System - LG LMX28988 Serie Guide D'utilisation

Masquer les pouces Voir aussi pour LMX28988 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SPACEPLUS ICE SYSTEM

wCAUTION
• Keep hands and tools out of the ice compartment
door and dispenser chute. You could break
something or injure yourself.
The icemaker will stop producing ice when the ice bin
is full. If you need more ice, empty the ice bin into the
extra ice bin in the freezer compartment so the
icemaker can keep producing ice.
Shake the ice bin occasionally to level the ice in it.
Sometimes the ice piles up near the icemaker,
causing the icemaker to misread the amount of ice
cubes and stop producing ice.
NOTE: Storing cans or other items in the ice bin may
damage the icemaker.
Keep the ice compartment door closed tightly. If the
ice compartment door is not closed tightly, the cold air
in the ice bin will freeze food in the refrigerator
compartment. This could also cause the icemaker to
not produce ice.
1
To remove the in-door ice bin, grip the front
handle, slightly lift the lower part, and slowly
pull out the bin as shown.
Ice-detecting
Sensor
NOTE: If the On/Off switch on the icemaker is set to
Off for an extended time, the ice compartment will
gradually warm up to the temperature of the
refrigerator compartment. To prevent ice cubes from
melting and leaking from the dispenser, ALWAYS
empty the ice bin when the icemaker is set to Off for
more than a few hours.
wCAUTION
While you handle the ice bin,
keep your hands out of blade.
The blade has sharp edges
could cause injury.
NOTE: To open or close the ice
room compartment, push or pull on
the handle.
2
To reinstall the in-door ice bin, slightly slant
the bin during replacement to avoid contact
with the icemaker.
NOTE: Avoid touching the Ice-detecting sensor
when replacing the ice bin. See the label on the ice
compartment door for details.
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lmx28988st

Table des Matières