Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. LIGHTING THE STOVE – THE STANDARD PROCEDURE
When the stove is lit, the air sliders above the door with the glass panel
should be moved outwards (maximum open position).
Open the door with the glass panel and put crumpled newspapers on
the fire grating, with a handful of splintered wood (thin wood) on top of it.
After the stove has been lit, the door with the glass panel must be firmly
closed.
IMPORTANT : the door with the glass panel should now not be opened
again, except for the purpose of topping up.
8. WOOD COMBUSTION
8.1
Topping up
To stoke the fire, the air sliders above the window should be opened to
the maximum position (moved outwards).
The logs should be inserted through the right-hand filler door or the door
with the glass panel and placed on the still sufficiently glowing base, in
no more than two layers. Do not overfill.
8.2
Method
The burning of wood is accompanied by high flames and heavy smoke
production. Wood must be burnt up rapidly and with a constant oxygen
supply. The combustion process may not be slowed down under any
circumstances.
Negative consequences could be :
- smouldering fire, condensation and tar discharge
- excessive production of soot
- inconvenience
substances)
- danger of asphyxiation
Wood provides intense combustion of short duration:
Sustained combustion is only achieved through regular top-ups, which
means: only when the wood has almost been burnt up and the
degassing process completed – high flames are reduced to small, low
caused
by
smoke
28
(emission
of
harmful
Publicité
Table des Matières
