Floating Bearing Side Marking; Cleaning - RK Rose+Krieger DuoLine S Notice D'assemblage

7.4.3 Floating bearing side marking

The floating bearing side for a linear unit of the "Roller" type
is marked with a sticker at the factory.
The position of the marking can vary.

7.4.4 Cleaning

The cover 3 must be opened for cleaning and to remove any
dirt present. After cleaning, ensure that the cover is tightly
sealed.
If a toothed belt change should be necessary, removing the
cover simplifies the threading in of the belt.
7. Life Phases 7. Life Phases 7. Life Phases
3
79 79 79