Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
Package Contents
2
Specifications
3
Connecting Devices
4
Positioning the Projector
(1) Installation worksheet for projecting on a pre-installed wall-
mounted board
(2) Installation worksheet for projecting on a plain wall
(3) Installation measurements in inches
(4) Installation measurements in millimeters
5
Installing the Projector
(1) Install the wall plate on the wall
(2) Determine the projection distance and pull out the slider
(3) Attach the setting plate to the wall plate
(4) Secure the projector to the setting plate
(5) Connect the power cable and other cables to the projector
6
Adjusting the Image
(1) Turn on the projector
(2) Display the test pattern
(3) Change the aspect ratio if necessary
(4) Adjust the focus
(5) Use the left adjustment dial to adjust the horizontal roll
(6) Use the right adjustment dial to adjust the horizontal rotation
(7) Use the top adjustment dial to adjust the vertical tilt
(8) Adjust the vertical position
(9) Adjust the forward/backward slide
(10) Turn off the display of the test pattern or computer image
7
Attaching the Covers
(1) Attach the wall plate cover and end cap
(2) Attach the cable cover to the projector
4
s Page 5
s Page 7
s Page 8
s Page 9
s Page 17
s Page 21
s Page 26
Publicité
Table des Matières
