Indoor Unit Installation; Refrigerant Piping - Daikin FVXS09NVJU Manuel D'installation

Indoor Unit Installation

1�

Refrigerant piping

1) Drill a hole (φ2-9/16 inch (65mm) in diameter) in the spot indicated by the
2) The location of the hole is different depending on which side of the pipe is taken out.
3) For piping, see "6� Connecting the refrigerant pipe" on page12.
4) Allow space around the pipe for a easier indoor unit pipe connection.
<Bottom piping>
Left bottom piping
2-15/16 (75)
Left bottom piping
2-15/16 (75)
Right back piping
2-15/16 (75)
Wall
<Left/Right -side piping>
Right bottom piping
2-15/16 (75)
Left/right piping
2-15/16 (75) 1-3/4 (45)
5
Wall
2-15/16 (75)
Exposed installation
Right bottom piping
Left/right piping
Concealed installation
1-3/4 (45)
Exposed installation
Left/right piping
Concealed installation
Right bottom piping
2-15/16 (75)
1-3/4 (45)
2-15/16 (75) 1-3/4 (45)
unit: inch (mm)
unit: inch (mm)
symbol in the illustration as below.
Left bottom piping Right bottom piping
Half concealed installation
Left/right piping
Wall
Left/right piping
1-15/16 (50)
Half concealed installation
Wall
2-15/16 (75)
■
English