Cleaning / Maintenance; Cleaning & Maintenance; Returns; Disposal Instructions - DEHAS EASYMATE RESERVOIR PM2300CE Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING / MAINTENANCE

DO NOT allow water to enter any components, or Fill Connector.
DO NOT immerse the Reservoir in any kind of liquid.
DO NOT use any strong solvent or abrasive cleaners.
DO NOT use alcohol, solvents, polishes, or any oily substance on Oxygen
Equipment.
1. Clean exterior surfaces with a cloth dampened with mild detergent and water.
2. Wipe dry with a clean cloth prior to use.
3. Store Reservoir in a clean area free from grease, oil, and other sources of
contamination.
4. Check and empty the Condensation Collection Container daily.
5. Clean the Condensation Collection Container with mild detergent and water, as
necessary.

RETURNS

Returned products require a Returned Goods Authorization (RGA) Number, contact
DEHAS.
All Reservoirs must be depleted of liquid Oxygen prior to shipping and must
be packaged in sealed containers to prevent damage. DEHAS, will not be responsible
for goods damaged in transit. Refer to
Internet,
www.dehas.de.

DISPOSAL INSTRUCTIONS

Dispose of the Reservoir in accordance with the local regulations.

TROUBLESHOOTING

If the Reservoir fails to function, consult the Troubleshooting Guide below.
If problem cannot be solved, consult your liquid Oxygen Supplier.
PROBLEM
Portable will not fill
Unable to disconnect
the Portable from
Reservoir
Bottom light flashes
Rapidly
No light(s) will show
on the Liquid Level
Indicator
water leaking from
Reservoir
MINOR LEAK of Liquid
Oxygen (Ref page 7)
MAJOR LEAK of Liquid
Oxygen (Ref page 7)
WARNING
Please Recycle
PROBABLE CAUSE
1. Not connecting the Fill
Connectors completely
2. Contact liquid Oxygen
Fill connectors frozen
from moisture on the Fill
Connectors
low Battery
Dead battery
Condensation Container
is full
Frost in the Fill Connector
Equipment Failure
8
DEHAS
Return Policy available on the
1. make sure the Fill Connectors
are fully engaged
2. Reservoir empty
Supplier to refill Reservoir
Allow time for the Fill
Connectors to thaw
Call your liquid Oxygen
Supplier for battery
replacement
Call your liquid Oxygen
Supplier for battery
replacement
Empty the Condensation
Container
Disconnect and reconnect
Portable
Call your liquid Oxygen
Supplier
REMEDY

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Easymate reservoir pm2345-0ceEasymate reservoir pm2335-0ce

Table des Matières