Safe Handling; Product Description; Package Includes; Components Required For Operation - Aesculap Econom CL Mode D'emploi

1. Safe handling

Risk of death by electric
shock!
DANGER
Do not open the product.
Connect the product only
to
supply.
Prior to use, check that the product is in
good working order.
Store the charger and Li-ion batteries at
room temperature.
Keep dry the charger and Li-ion
batteries.
Charge the Li-ion batteries prior to first
use.
To prevent damage caused by improper
setup or operation,
compromise the manufacturer warranty
and liability:
– Use the product only according to
these instructions for use.
– Follow the safety and maintenance
instructions.
– Only combine Aesculap products with
each other.
Keep the instructions for use accessible
for the user.
Always adhere to applicable standards.
a grounded power
and to
Ensure that the electrical facilities in the
room in which the device is being used
conform to IEC norms.
Unplug the device by pulling the plug,
but never by pulling the power cord.
Do not operate the product in explosion-
hazard areas.
Do not use the product if it is damaged
or defective. Set aside the product if it is
damaged.

2. Product description

2.1 Package includes

Art. no.
GT800
GT810
GT834
GT801
not
GT803
see Accessories/Spare
parts
TA013895
GT604

2.2 Components required for operation

• Battery-operated clipping machine Econom CL/Econom CL Equipe/
Econom CL Fitter
• Charger
• Mains power cord (with device plug)
• Li-ion battery
Designation
Battery-operated clipping machine Econom CL,
Econom CL Equipe or
Econom CL Fitter
Li-ion battery
Charger
Mains power cord (with device plug)
Instructions for use
Hand oiler
3