Product Description; Installation And Connection - Oase ProMax Garden Classic 3000 Mise En Service

Product Description

Overview
1 Transport handle
2 ON/OFF rocker switch
3 Connection, pressure side, G1 internal thread
4 Water infill screw
5 Connection, suction side, G1 internal thread
6 Water drain screw
7 Pump casing
8 Pump base
9 Motor casing
10 Power connection cable
11 Capacitor casing

The unit contains cast iron, which is subject to a natural corrosion process. This does not
impair the function of the unit.

Installation and connection

NOTE
If you are using the pump as a booster pump, ensure that the max. internal pressure of 6 bar on
the pressure side is not exceeded.
The pump pressure is added to the pre-pressure.

 Example: Pre-pressure = 1 bar, max. pressure of the pump = 4.5 bar, total pressure = 5.5 bar.
EN
POX0029
11