Vitamix Creations Elite VM0158 Manuel Du Propriétaire page 9

PA RTS A N D F E AT U R E S
On / Off Switch (not shown): The On / Off (or Power) Switch is on the right-
hand side of the machine base. This switch controls the power to the machine.
Start / Stop Switch: Pressing down on the Start / Stop Switch will start the
blending process. Pressing down on the Start / Stop Switch again will stop the
blending process.
Variable Speed/Program Dial: The Variable Speed Dial selects blade rotation
speeds from 1 to 10 (low to high). The Pro-750 has 5 programs to the left of
center on the variable speed/program dial.
Pulse Switch ( ): The Pulse Switch can be used when blending with
Variable Speeds or Programs (Pro-750 only).
Container: Ounces, cups, and milliliters are clearly marked.
CAUTION: Lids and tampers are not interchangeable between different
container styles, types, and sizes.
Tamper: Using the tamper maintains circulation by preventing air pockets
during blending.
2-Part Lid: Always use the lid and the lid plug during blending.
Lid Plug: Insert through the lid and secure by turning clockwise. Remove the lid
plug to use the tamper or add ingredients.
To Lock the Lid in Place: Position lid on container with lid flaps midway between
the spout and the handle. Push the lid onto the container until it locks in place.
The lid must always be secured when processing, especially hot liquids that
may scald. Never operate the blender without checking to make sure the lid is
securely locked in place.
To Remove the Lid: Lift up on one lid flap while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the "locked"
to "unlocked" position and lift out.
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container while
machine is running.
9