Securing The Pipe To Be Welded; Welding Step-By-Step; Preparing To Weld - AXXAIR SATF-40NDHX Notice Originale

- 23 -
English
INNOVATIVE ORBITAL SOLUTIONS
9.

Securing the pipe to be welded:

This operation requires for the electrode to align with welding faces. Great accuracy is required to ensure
that the weld is properly carried out in the joint seam of the section.
Electrode alignment on the
section to be welded
10.

Welding step-by-step:

Preparing to weld:

Good preparation for closed chamber welding is
essential to achieve satisfactory welding results. You
must have a cut perfectly perpendicular to the axis.
Refer to the CC-type orbital cutting machine.
Depending on the quality required, you may
straighten the face shaping with a tool (DC machine
type) so as to guarantee a perfectly smooth, streak-
free surface.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363