Declaration Of Conformity; Presentation; Machine Handling And Storage; Handling - AXXAIR SATF-40NDHX Notice Originale

Masquer les pouces

Table des Matières

Les langues disponibles

INNOVATIVE ORBITAL SOLUTIONS

We certify that this product complies with the standards and regulations found on Page 3.

Presentation:

These machines are intended for closed-chamber weld head orbital TIG welding. This range of machines

welds end-to-end pipe, elbow joints, pipe ferrules, T-joints, SMS connectors and other in a fully sealed

inert environment.

The weld heads are controlled by an AXXAIR welding generator.

Maximum

welding

current rating:

Maximum

welding

current for a 100%

arc time factor:

Outside

pipe

diameter range:

Electrode diameter:

Cooling unit:

Operating

temperature:

Machine handling and storage:

Handling:

The SATF weld heads are portable devices that require no special handling (the heaviest weld head

weighs less than 10 kg).

However, standard precautions should be taken to avoid damaging the head and its hose during handing

and transport.

Storage:

If the weld head is not going to be used for a long period of time, store it in its original packaging.

Cleaning the head and emptying the coolant is recommended before repacking the weld head.

Protect the weld head from corrosion. Place a desiccant in the container where the weld head is stored.

Bench mounting:

SATF weld heads are designed to be mounted on pipe or parts to be welded using the clamping jaw and

the head's closing system. The device can also be bench mounted as a fixed welding station by securing

it by the handle using a vice.

Join

experience