Honeywell PRO 2000 Serie Manuel D'utilisation page 5

This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is
set the time and day. Then check the settings below and change if needed:
Set time and day (required for proper operation) ............... See page 6
1.
Select system setting: Preset to Off .................... To change, see page 7
2.
Select fan setting: Preset to Auto ....................... To change, see page 8
3.
Program schedules: Preset to energy-saving levels
4.
while you're at work or asleep........................ To change, see pages 9-11
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any
time, and manually adjust the temperature (see pages 12-13).
3 69-2799EFS—03