How To Operate The Appliance; Adjusting The Temperature; Supercool - Inventum IKK1785S Mode D'emploi

In order to prevent the condenser from making contact with the rear wall, you must rotate the plastic
distance guide by 90°.
In order to ensure a smooth and vibration-free operation of your larder, the adjustable front feet must
be adjusted to a suitable height and mutually balanced. You can guarantee this by rotating the adjustable
feet clockwise or anti-clockwise. Do the following before placing food in the larder.
Before you start using the larder, you should wipe all components with warm soapy water with washing-
up liquid, all-purpose cleaner or soda, for example. Wipe the inside and components of the larder after
cleaning with clean water and properly wipe everything dry. Leave the appliance to dry for 1 to 2 hours.
4

how to operate the appliance

ADJUSTING THE TEMPERATURE

With the temperature adjusting knob you are able to adjust the larder's temperature.
Also use the adjusting knob to activate the Supercool function.
adjusting knob for
temperature
The standard setting of the temperature is 5°C.
The appliance will now cool continuously until the set temperature has been reached. Allow the appliance to reach the
required temperature with no food in the larder. Usually this will take 2 to 3 hours. After that, you can set the required
temperature and fill the larder with food.
Repeatedly press the knob until the indicator light of the required temperature lights up. The temperature settings are
shown in the following sequence. 2°C, 4°C, 5°C, 6°C, 8°C and supercool.
If you press the adjusting knob until the indicator light of supercool lights up, it will start to flash after 3 seconds. supercool
is now active.
ALARM
If there is a problem with the larder, the indicator light for the alarm will light up. Check what the problem could be
in chapter 7.

SUPERCOOL

When can supercool be used?
• If you want to cool large quantities of food
• If you want to cool food quickly
• If you want to store seasonal vegetables properly for a longer period of time
• Press the adjusting knob until the indicator light for supercool lights up. The light will remain on as long as supercool
remains active.
• In order to make optimum use of the supercool setting, you must activate it 6 hours before placing the fresh food in the
larder.
• You can deactivate supercool by pressing the adjusting knob once more.
supercool is deactivated automatically after 6 hours or when the thermostat sensor gets below 2°C.
Attention:
The ambient temperature, the temperature of the recently stored food and the frequency by means of which the door is
opened, have an effect on the temperature in the larder. Take this into account when adjusting the temperature.
• supercool is deactivated automatically after 6 hours or when the thermostat sensor gets below 2°C.
• You should never place hazardous, highly flammable or explosive substances such as alcohol, acetone or petrol in the
larder, because there will be a hazard of explosion.
• A 5 minute delay function is used to prevent damage to the larder's compressor when you remove the plug and insert it in
the socket again to switch on the larder or during a power interruption. You larder starts working normally after 5 minutes.
16
• English
indicator light for
supercool
indicator light for alarm
indicator lights for
set temperature