JB Systems Party Derby Mode D'emploi page 7

ENGLISH
 Now you can use the UP or DOWN buttons to select the desired effect group:
o [SouP] Sound controlled RGB projector show.
 Press [ENTER] to select this mode.
o [SouF] Sound controlled white flash show.
 Press [ENTER] to select this mode.
o [SouM] Sound controlled mixed effects show.
 Press [ENTER] to select this mode.
Note: The sensitivity of the build-in microphone can be set by turning the [microphone sensitivity] knob on
the rear of the Unit.
3) FIXED COLOR STANDALONE MODE:
You can set a fixed color for the RGBW DERBY
 Press the [MENU] button until the display shows [COL].
 Press the [ENTER] button to confirm your choice.
 [COLO] will appear on the screen
 Press the [ENTER] button to enter the setup mode.
 Use the [UP/DOWN] buttons to set the intensity of the red color. [r.000] = off, [r.255] = maximum
intensity
 Press the [ENTER] button to confirm your choice and to go to the next color setting.
 Use the [UP/DOWN] buttons to set the intensity of the green color. [G.000] = off, [G.255] = maximum
intensity
 Press the [ENTER] button to confirm your choice and to go to the next color setting.
 Use the [UP/DOWN] buttons to set the intensity of the blue color. [b.000] = off, [b.255] = maximum
intensity
 Press the [ENTER] button to confirm your choice and to go to the next color setting.
 Use the [UP/DOWN] buttons to set the intensity of the white color. [w.000] = off, [w.255] = maximum
intensity
 Press the [ENTER] button to confirm your choice and to go to the strobe speed setting.
 Use the [UP/DOWN] buttons to set speed of the strobe effect. [S. 00] = off, [S. 99] = maximum speed
 Press the [ENTER] button to confirm your choice.
4) FIXED FLASH PATTERN STANDALONE MODE:
You can select a specific flash pattern to run continuously at your desired speed.
 Press the [MENU] button until the display shows [Str].
 Press the [ENTER] button to confirm your choice.
 [Stro] will appear on the screen
 Press the [ENTER] button to enter the setup mode.
 Use the [UP/DOWN] buttons to browse the 18 different flash programs. [St01] to [St18]
 Press the [ENTER] button to confirm your choice and to go to the strobe speed setting.
 Use the [UP/DOWN] buttons to set speed of the strobe effect. [S. 00] = off, [S. 99] = maximum speed
 Press the [ENTER] button to confirm your choice.
5) MASTER/SLAVE STANDALONE MODE:
When you have several PARTY DERBY units and you want them to all work synchronously, you can work
in the so called master/slave mode. To do this, just daisy-chain all the units and make the settings of the
desired automatic or sound controlled program in the first unit of the chain (see description above). This
unit is called the Master unit. Now put all the other units is slave mode. Once this is done, the "slave" units
will follow the orders of the Master unit, so they work in perfect synchronicity.
To set a unit in slave mode:
 Press the [MENU] button until the display shows [SLA].
 Press the [ENTER] button to enter this mode.
 [SLAV] will appear on the display
 Press the [ENTER] button to confirm the slave mode.
JB SYSTEMS
®
5/49
USER MANUAL
PARTY DERBY