Temporary Schedule Override - Honeywell RTH2310 Mode D'emploi

Operating Manual
Temporary override of schedule
To temporarily override the schedule, press
desired temperature is displayed. The period number will
flash to indicate that the current period has been overridden.
The new temperature will be used for the next 2 hours.
NOTE: Pressing
temperature. To change the setpoint temperature, press
either button more than once.
Press the Mode button if you wish to cancel the temporary
setting.
or once will display the setpoint
or until the
14
Press to set the
temperature
The period number flashes
when the schedule is
temporarily overridden