Adjusting The Brightness; Automatic Brightness Adjustment; Manual Brightness Adjustmentt - Elmo Teacher's Tool TT-02s Mode D'emploi

Adjusting the brightness

Press the [BRIGHTNESS •
] buttons on the main unit to adjust image brightness.
Following two adjustment mode can be selected from the
OSD menu.

Automatic brightness adjustment

([Brightness] → [Auto] in the OSD)
Brightness of the image changes automatically according to the
brightness of the object.

Manual brightness adjustmentt

([Brightness] → [Manual] in the OSD)
Brightness of the image is fixed to the specified level.
Note
• Factory setting is set to [Auto].
• Manual adjustment fixes the brightness and does not follow the change in
brightness of the object.
• When the brightness becomes dark, the frame rate slows, and the image may
become hard to see.
• By setting [Guide] to [On] in the OSD menu, the setting details is displayed on the
screen.
• To go back to factory settings, press the [BRIGHTNESS •
] buttons on the main unit at the same time.
English
] and [BRIGHTNESS •
SELECT MENU OK
Focus
Brightness Auto
Mode Manual
Pause
Image Rotation
MENU OK
SELECT
Focus
Auto
Brightness
Mode
Manual
Pause
Image Rotation
] and [BRIGHTNESS •
39