Oerlikon CITOMIG 200MP Instructions D'utilisation Et De Maintenance page 9

GRAPHIC DISPLAY FOR MIG/MAG WELDING SETTING:
MIG/MAG mode:
SYNERGY OFF, SYNERGY ON
Synergic program information
Wire speed pre-setting
Regulation scale:
SYNERGY OFF: electronic inductance
SYNERGY ON: arc length adjustment
NOTE: BASED ON THE SET WELDING MODE, SOME DATA ON THE
MIG/MAG SCREEN CANNOT BE VISUALIZED.
MIG/MAG WELDING SETUP
9 - EN
EN
Digital ammeter / voltmeter
SYNERGY OFF: voltage setting
SYNERGY ON: thickness setting
Trigger mode : 2T / 4T / SPOT