Replacing Battery; Waste Disposal - Dostmann Electronic LOG10 Mode D'emploi

DE_Log10_20_Anleitung 13.08.2013
LOG10 / LOG20
– Data logger
2.6 USB-Port
• For readout or programming, the data logger must be connected via USB-
cable with a PC.
• View from the front: On the left side there is the USB-port. The port is pro-
tected by a small white rubber cap. To operate the USB-port please remove
the rubber cap.
• After the completed communication with the PC do not forget to plug the
rubber cap back into the port. It prevents dirt and water from entering the
data logger.
2.7 Rear side of the data logger / battery case
• On the rear side of the data logger you will find the battery case and a printed
sticker.

2.8 Replacing battery

• To replace the battery please open the battery cover on the rear side. There-
fore you have to turn the battery cover 90° to the left. Remove the battery
from the instrument and replace with a new battery.
• The "BAT "symbol indicates that the battery needs to be exchanged. The
instrument allows app. 10 hours of further operation after displaying the
"BAT" symbol The battery symbol indicates according to the battery status
between 1 to 3 segments.
• If the display indicates only "PF", the battery is completely exhausted. Please
replace the battery immediately.

2.9 Waste disposal

This product has been manufactured using high-grade materials and compo-
nents which can be recycled and reused.
16
16:02 Uhr Seite 9
LOG10 / LOG20
– Data logger
Never dispose of empty batteries and rechargeable batteries in
household waste.
As a consumer, you are legally required to take them to your
retail store or to appropriate collection sites depending on natio-
nal or local regulations in order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Elec-
trical and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The
user is obligated to take end-of-life devices to a designated col-
lection point for the disposal of electrical and electronic equip-
ment, in order to ensure environmentally-compatible disposal.
3.0 Specifications
Temperature logger
Internal temperature -30..+60°C
Relative Humidity
Memory
Interface
Working temperature (without display)
Storage temperature
Dimensions
Weight
Power supply
Temperature-humidity
Log10 logger Log20
-30..+60°C
- - - 0..100%rH
appr. 20.000 Data sets
USB
-30..+60°C
-30..+70°C
92 x 55 x 21 mm
95 g
1 x CR2032 3 V
17