Service, Troubleshooting, And Repair - Ardisam Eskimo Ice Fishing Gear HC40Q8 Manuel De L'utilisateur

SERVICE, TROUBLESHOOTING, AND REPAIR

Service Information
At Ardisam, we build quality and durability into the design
of our products; but no amount of careful design by us, and
careful maintenance by you, can guarantee a repair-free life
for your unit. Most repairs will be minor, and easily fixed by
following the suggestions in the troubleshooting guide in
this section.
The guide will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, you may want to rely on your
retailer or an authorized repair center (contact your retailer for
a list of authorized mechanics in your area). A parts breakdown
can be found on our website, www.GetEskimo.com.
We will always be glad to answer any questions you have,
or help you find suitable assistance. To order parts or inquire
about warranty, call or write us at the address found on the
next page, under the section "ordering repair parts".
CAUTION
AVOID INJURY! DO NOT ATTEMPT TO START THE
ENGINE USING STARTING FLUID.
AVOID INJURY! DO NOT SPRAY FLAMMABLE
LIQUIDS OR VAPORS INTO AIR CLEANER,
CARBURETOR OR SPARK PLUG CHAMBER.
AVOID INJURY! DO NOT REMOVE SPARK PLUG
AND PULL STARTER ROPE. FLAME CAN SPRAY
OUT & IGNITE FROM A SPARK FROM SPARK PLUG.
10
Check for parts online at www.GetEskimo.com or call 800-345-6007 M-F 8-5 CDT
Operator's Manual
Propane Powered Ice Auger