Samsung FlexWash WV60A9900A Serie Mode D'emploi page 70

Maintenance
NOTE
If the pump filter is clogged, the "5C" information code appears on the washer's display screen.
CAUTION
• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an operational
failure or a leak.
70 English
Untitled-5 70
5. Clean the pump filter using a soft brush. Make sure
the drain pump propeller inside the filter is not
clogged.
6. Reinsert the pump filter, and then turn the filter knob
to the right.
7. Close the filter cover.
NOTE
• Some pump filters feature a safety knob that is
designed to prevent children from accidently opening
the filter compartment. To open the safety knob of
the pump filter, push in and turn it counterclockwise.
The spring mechanism of the safety knob helps open
the filter.
• To close the safety knob of the pump filter, turn it
clockwise. The spring makes a rattling sound, which
is normal.
2021-06-07 11:22:15