Installation; Unpacking Your Washer - Samsung FlexWash WV60A9900A Serie Mode D'emploi

Installation

Follow these instructions carefully to ensure proper installation of your washer and to prevent accidents
when doing laundry.
WARNING
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control
board, heat sink, motor, inlet valve and pump.

Unpacking your washer

Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown
on the next page. If your washer was damaged during shipping, or you do not have all of the items, call
1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or strain, wear protective gloves whenever
lifting or carrying the unit.
WARNING
Packing materials can be dangerous to children; Keep all packing material (plastic bags, polystyrene, etc.)
well out of children's reach.
16 English
Untitled-5 16
CAUTION
You must have at least 2 people unpack the washer. To
remove the cushion bottom of the packing materials, do
not tip the washer over on its front side.
When you lay the washer down to remove the carton
base, protect the side of the washer and lay it down
carefully. Never lay your washer on its back or front.
CAUTION
Do not yank out or remove the sealing of the protective
cover. This may cause a leak during the washing process.
2021-06-07 11:22:03