Demolition And Disposal; Manufacturer's Declaration; Declaration Of Conformity - CAME DBC 01 Manuel D'installation

Connecting DBC 01 with DIR/DOC
DBC 01 with DIR
0
10
DIR
TX 2
Tx
DIW
Tx
DBC 01 with DOC
0
10
DIW
Tx
DOC
24 0
Tx
Problems
- The led on the receiver is fl ashing: the transmitter battery is run
down
- The led on the receiver stays on: signal is interrupted due to
transmitter malfunction.
2 C1
2 C1
DIR
-
10 2
Rx
DIW
-
24 0
Rx
2 C1
2 C1
DIW
-
24 0
Rx
24
Rx

Demolition and disposal

Our products are made up of various types of materials. Most of
electrical wires, etc.) may be disposed of in normal garbage
collection bins and can be recycled by disposing of in specifi c
recyclable material collection bins and disposal in authorized
Other components (electrical boards, remote control batteries,
etc.), however, may contain polluting substances.
They should therefore be removed and given to qualifi ed service
Prior to disposal, it is always advisable to check specifi c regulations
C
TX NC

Manufacturer's declaration

TS C NC NO

Declaration of conformity

la CAME Cancelli Automatici S.p.A.
via Martiri della Libertà, 15
31030 Dosson di Casier - Treviso - ITALY
tel (+39) 0422 4940 - fax (+39) 0422 4941
internet: www.came.it - e-mail: info@came.it
Declare under their own responsibility that the following
products for gate and garage door automation called:
Are compliant with essential requirements and with pertinent
regulations established by the following directives and to the
applicable parts of the standards listed below:
Electromagnetic compatibility directive 2004/108/CE
Electrical equipment designed for use within certain voltage
TS C NC NO
limits directive 2006/95/CE
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
C
0 N0 NC
EN 60335-1
EN 13241-1
Product disposal
them (aluminium, plastics, iron,
centres.
companies for proper disposal.
in force in the place of disposal.
PLEASE DISPOSE OF PROPERLY!
DBC 01- DBC 03-DBC 04
L'amministratore delegato
Sig. Gianni Michielan
119RU82 ver 0.1 - 09/2008