Front Panel Indicators - Rega ARIA MK3 Mode D'emploi

ARIA
POWERING UP
The Aria is activated by pressing the On/Off
button situated to the left of the control panel.
The REGA logo will glow RED. It is recommended
to activate the Aria before the power amplifiers
and deactivate after they have been switched off.
N.B. The unit will be muted for approximately
5 seconds when powered-up or switching
between inputs. MM or MC inputs are selected
by pressing the input button on the front panel.
The LED indicator will show the selected input.
When switching between MM & MC, the Aria goes
into mute briefly to avoid any intrusive switching
noise whilst the circuitry settles. When switching
between MC and MM, both LED's will temporarily
light, with a short delay in the audible 'click'
of the relay. This is a function of the mute and
relay contact cleaning / activation circuit and is
normal.
4
WORLD CLASS HI-FI MADE IN ENGLAND | www.rega.co.uk

FRONT PANEL INDICATORS