Environmentally Safe Battery Disposal; Proposition 65; Installation; Unpack The Machine - GreenWorks CSF401 Manuel D'opérateur

Masquer les pouces Voir aussi pour CSF401:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7
ENVIRONMENTALLY SAFE
BATTERY DISPOSAL
The toxic and corrosive materials below are in the batteries
used in this machine: Lithium-Ion, a toxic material.
WARNING
Discard all toxic materials in a specified manner to prevent
contamination of the environment. Before discarding
damaged or worn out Li-ion battery, contact your local
waste disposal agency, or the local Environmental
Protection Agency for information and specific instructions.
Take the batteries to a local recycling and/or disposal center,
certified for lithium-ion disposal.
WARNING
If the battery pack cracks or breaks, with or without leaks,
do not recharge it and do not use. Discard it and replace
with a new battery pack. DO NOT TRY TO REPAIR IT! To
prevent injury and risk of fire, explosion, or electric shock,
and to avoid damage to the environment:
Cover the terminals of the battery with heavy-duty
adhesive tape.
DO NOT try to remove or destroy any of the battery
pack components.
DO NOT try to open the battery pack.
If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.
DO NOT put these batteries in your regular household
trash.
DO NOT incinerate.
DO NOT put them where they will become part of any
waste landfill or municipal solid waste stream.
Take them to a certified recycling or disposal center.
English
8

PROPOSITION 65

This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
Lead from lead-based paints;
Crystalline silica from bricks and cement and other
masonry products;
Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
Save these instructions.
9

INSTALLATION

Do not change or make accessories that are not
recommended by the manufacturer.
Do not install battery pack until you assemble all the parts.
9.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine before
use.
If the parts are damaged, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
7
WARNING
WARNING
WARNING
WARNING
WARNING
EN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

2000600

Table des Matières