Operating Functions - Klarstein Metrobreeze Las Vegas 12 2G Mode D'emploi

EN
38

Operating functions

Button Function description
Swing When you press this button, the corresponding indicator will
illuminate and the louvers will swing up and down between
45° and 90°. When the button is pressed again, the indicator
light will turn off and the louvers will remain in their current
position.
+ /­ (Up/Down) Use the "+" and "-" buttons to increase or decrease the
respective values.
Cooling mode:
If you press this button once, the current temperature is
displayed. Each time the button is pressed again, the
temperature is increased by 1 °C. If you press and hold the
button for three seconds, the temperature jumps faster to the
maximum value. The set temperature flashes on the screen and
the unit "°C" lights up.
Dry mode:
If you press this button once, the current temperature is
displayed first. If you press the button again, you can adjust
the humidity setting. Each time the button is pressed, the
target humidity is increased by 5% RH. If you press and hold
the button for 3 seconds, it will allow you to jump faster to
the maximum humidity value. The set humidity flashes on the
screen and the unit "RH %" is displayed.
Timer The timer time can be increased by one hour each time
the button is pressed. If you press and hold this button
for 3 seconds, you can jump faster to the maximum timer
value. The time will be displayed on the screen and the
corresponding indicator light will illuminate.
Note: In order to prevent frequent operation of the buttons, the conversion time
between different modes is 2 seconds.
Note: This button is deactivated in automatic and fan mode.