Language Menu; Factory Reset Menu; Computer Image Menu - Dell 1100MP Manuel Du Propriétaire

Language Menu

Factory Reset Menu

Computer Image Menu

NOTE:
This menu is only available connected to a computer.
NOTE:
Adjust the Frequency first and then the Tracking.
Press the
panel or the
control to select the preferred language for
the OSD.
Presss the
Menu button on the remote control to
confirm the language selection.
Select Yes to reset the projector to its
factory default settings. Reset items
include both computer image and video
image settings.
F REQUENCY
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
RACKING —Synchronize the phase of the
T
display signal with the graphics card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
http://www.pureglare.com.au
or button on the control
or button on the remote
on the control panel or the
—Change the display data clock
Using Your Projector
21