Adjusting The Projected Image; Raising The Projector Height; Lowering The Projector Height - Dell 1100MP Manuel Du Propriétaire

Adjusting the Projected Image

Raising the Projector Height

1
Press the elevator button.
2
Raise the projector to the desired display angle, and then release the button to
lock the elevator foot into position.
3
Use the tilt adjustment wheel to fine-tune the display angle; if necessary, press the
side elevator buttons to raise the rear side of the projector to the desired display
angel.

Lowering the Projector Height

1
Press the elevator button.
2
Lower the projector, and then release the button to lock the elevator foot into
position.
Elevator button
1
Elevator foot
2
Tilt adjustment wheel
3
12
Using Your Projector
1
http://www.pureglare.com.au
2
3