Daikin BRC1E72 Manuel D'installation page 11

Switch box
(field supply)
(Use optional accessory
KJB111A)
NOTE
● Install the control on a fl at surface only.
● To prevent deformation of the lower case, avoid over-tightening the installation screws.
3-7 Install the upper case.
● Align the upper case with tabs of the lower case (6 points), insert and install the upper case.
● Install the wiring with care to prevent pinching.
● Peel off the protective membrane which overlays the upper case.
English
Small screws (M4×16mm)
Switch box for one unit
(with no cover)
1-1/8
(Installation pitch)
9