Bluetooth Operation - Tivoli Audio MUSIC SYSTEM BT Manuel Utilisateur

Bluetooth Operation

Prior to pairing, verify your device supports Bluetooth and your device is not connected to any other
Bluetooth product. Devices may pair differently. Below is a general guide.
1. Switch the Music System BT's source to Bluetooth/AUX using the source button. This will
power on the Bluetooth. Turn the volume up about ¼ to start. Also turn up the volume on the
source device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select "Tivoli Bluetooth (Not Paired)" when it appears on your device's screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli Bluetooth" will change
from "Not Paired" to "Connected".
4. You will hear a ring tone from the Music System BT confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should not have
to pair your device again. Depending on your device, you may need to make multiple
attempts at Pairing and/or Connecting to the Music System BT, but please give your
device adequate time to Pair or Connect before repeating the process.
Important Notes About the CD Player
• The display does not show the total disc time for MP3/WMA CDs due to their often very lengthy
table of contents. Total time will be shown for commercial music CDs but if either track +/- but-
tons are pressed, the total time will disappear since the initial mode was changed
• Playback will be delayed slightly while the table of contents is read.
• Disc functions will not work while the disc is loading.
• Do not use the Eject button to load a CD.
• Changing sources while a CD is playing causes the CD to stop playback. Playback will resume
when the source is set to CD again.
• The sound quality of MP3, CD-R/CD-RW, and even commercially recorded discs can vary greatly.
The same holds true for the sound quality of portable MP3 players.
• Do NOT use any CD lens cleaning discs since these are not designed for slot-load machines.
• Avoid bending the disc when loading or ejecting.
• Do not move the unit while a disc is playing and do not ship the unit with a CD inside.
• Do not try to insert a disc in the slot if one is already inside the unit.
• Do not insert specially shaped discs or 3" CD "single" discs.
• You may experience a delay in playback when inserting MP3 or WMA discs while the player
reads the directory.
• Paper labels stuck to CD-R/CD-RWs may become loose and possibly damage the player.
• CDs with severe scratches may not play properly.
• Do not insert anything except a CD inside the loading slot.
• In the rare event you experience an error, unplug the power cord for 60 seconds and then plug
it back in firmly.
12 – ENGLISH