Télécharger Imprimer la page

BH FITNESS G2518 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
STARTING.-
To switch the monitor on first plug the
adapter, supplied with the machine,
into the mains socket (220 V – 240 V)
and the jack on the adapter into the
socket at the bottom of the machine.
(Fig. 4)
The
screen
automatically on the "U0" (User 0)
program
as
exercising, Select the user, between
U0-U4, using the UP▲/DOWN▼ keys
and then press ENTER.
Next the Male / Female symbols will
appear,
Select
UP▲/DOWN▼
ENTER to confirm. Then Age will
appear,
select
UP▲/DOWN▼ keys (between 10 to
100) and press ENTER to confirm. It
will now ask for your height, select
using
the
UP▲/DOWN▼
(between 90 to 210 cm) and press
ENTER to confirm. Weight will appear,
select using the UP▲/DOWN▼ keys
(between 10 to 150 kg) and press
ENTER to confirm.
If at any time during exercise you
press the START/STOP button then
all of the unit's functions will stop.
Pressing the START/STOP button
again will restart the machine.
The monitor will switch itself off
automatically if the unit stands idle for
more than 4 minutes.
Important:
components in special containers,
Fig.1.
will
switch
soon
as
you
using
keys
and
using
Deposit
electronic
English
MONITOR FUNCTIONS.-
This electronic unit has seven function
keys:
RESET, ENTER; UP▲; DOWN▼;
QUICKSTART. The centre of the
screen will simultaneously display the
selected program level. There are five
on
windows
SPEED/RPM;
start
WATTS/CALORIES
RATE.
This monitor also has 1 manual
program, 12 pre-set exertion level
programs; 1 user defined program and
the
4 Heart Rate Control programs; 1
press
Fitness test; 1 watt program and 1
random program.
the
With the monitor either stopped or
working
WATT/CAL windows give alternate
displays every 5 seconds.
keys
CHANGING
WORK MODE TO ANOTHER.-
After
programs will start flashing. This
monitor allows you to work in 7
different modes: Manual, Program,
Fitness, Personal, Watt, Pulse (HRC)
and Random. In order to pass from
one mode to another, press the
START/STOP button to stop the
monitor, then press RESET and, with
the
buttons, select the desired mode.
Pressing the QUICKSTART key will
begin directly in manual mode.
9
RECOVERY,
that
TIME;
the
SPEED/RPM
FROM
selecting
the
help
of
the
START/STOP;
indicate
the
DISTANCE;
and
PULSE
and
ONE
user
various
UP▲/DOWN▼

Publicité

loading