Confi Guration Parameters - CHAFFOTEAUX EXPERT CONTROL Mode D'emploi

technical area
Press the OK button.
Turn the knob and scroll the parameters to
be set:
- Service Center Data
- Enable service warnings
- Service warning reset
- Months remaining before service
Press the OK button to confi rm.
Press the back button "
to the previous visualisation.
Turn the knob and select:
- SERVICE
(If it becomes necessary to check or confi g-
ure certain essential parameters for the cor-
rect operation of the system)
Press the OK button.
Turn the knob and select among the list of
visualised components.
- Solar Controller (where present)
follow the instructions appearing in the
solar documentation
- Boiler
- Energy Manager (where present)
follow the instructions appearing in the
Energy Manager documentation
- Multi-zone control (where present)
follow the instructions appearing in the
Multi zone documentation.
- ...
Turn the knob and select:
- Boiler
Press the OK button.
Turn the knob and select:
- Confi guration parameters
Press the OK button.
Turn the knob and scroll the parameters:
- Gas parameter
- Visualization
- Boiler PCB Change
Press the OK button to confi rm.
Press the back button "
to the previous visualisation.
Turn the knob and select:
FAULTS
Press the OK button.
Turn the knob and scroll the parameters:
- Solar Controller (where present)
" twice to return
- Boiler
- Energy Manager (where present)
- Multi-zone control (where present)
- ...
Press the OK button.
Turn the knob and select the relevant pa-
rameter.
Press the OK button.
Turn the knob to scroll on the display the last
10 errors recorded.
follow the instructions appearing in the
solar documentation
follow the instructions appearing in the
Energy Manager documentation
follow the instructions appearing in the
Multi zone documentation.
GB
" twice to return
83