Home Screen; Backlight - CHAFFOTEAUX EXPERT CONTROL Mode D'emploi

display settings
press the OK button, select auto or man-
ual, press the OK button.
Press OK to confi rm the choice, and press
the back button " " to return to the previ-
ous screen.
Turn the knob and select:

- Home screen

When setting the main page it is possible
to choose the information visualised.
By choosing the "Customizable" view
mode, it is possible to select all the de-
sired information. Alternatively, it is pos-
sible to choose from one of the following
pre-confi gured view
Base
Active sources
CO2 saving (where present)
Customizable
Boiler base (only viewable with room
probe excluded)
Boiler complete (only viewable with room
probe excluded)
Solar (where present)
Zone (where present)
FWS (where present)
HP system (where present)
Press OK to confi rm the selection. Press the
back button " "to return to the previous
visualisation.
Turn the knob and select:
- Brightness in standby
use the knob to adjust the brightness of
modes:
the display during standby periods.
Press the OK button to confi rm.
Turn the knob and select:

- Backlight

use the knob to set the time for which the
display backlight remains on after the last
time the system interface was used and
has remained inactive for a certain period
of time.
Press the OK button to confi rm.
Turn the knob and select:
- Home screen timing
use the knob to select the time period for
which the main screen is displayed.
Press the OK button to confi rm.
Press the back button "
previous screen.
GB
" to return to the
67