Abus TVAC70200 Mode D'emploi page 11

Installing and adjusting the camera
2.4.2. Remove the four fixing screws from the
2.4.3. Place the camera centrally on the slide,
2.4.4. Fix the camera to the slide using a
2.4.5. Use all the slots on the slide to achieve
2.4.6. Reinstall the slide on the bottom case.
2.5. Installing the top case
2.5.1. Place the top case on the bottom case
2.5.2. Screw the earth cable onto the top case
2.5.3. Screw the open end of the earth cable
2.6. Installing the sun shield
2.6.1. Place the sun shield on the top case of
2.6.2. Install the sun shield with the screws
3. Technical data
 Main fuse: T3.15A
 2x integrated heating
 Protection class IP68
 Internal cable routing
camera slide in the bottom case.
ensuring that the screw point on the
bottom of the camera is over the slot in
the slide.
hexagon socket screw.
the best distance from the camera lens
to the viewing window.
and fix both of the cases into the pins
provided.
at the labelled point.
onto the bottom case at the labelled
point.
the weatherproof housing, so that it is
perfectly in line with the back of the top
case.
supplied along the slots.
11