Unpack The Print Module; Scope Of Delivery; Set Up The Print Module; Connect The Print Module - Valentin SPX II Guide De Référence Rapide

Unpack the Print Module


Lift the printing system on the bottom and remove it from the carton.

Check the print module for transport damages.

Remove the foam transportation safeguards near the printhead.

Check delivery for completeness.

Scope of Delivery

•
Print module.
•
Power cable.
•
Data cable for USB interface.
•
I/O accessories
(female connectors for I/O, I/O 24 cable).
•
1 transfer ribbon roll.
NOTICE!
Retain original packaging for subsequent transport.

Set up the Print Module

CAUTION!
The label printer and the print media can be damaged by moisture and water.

Set up the print module only in a dry place protected from sprayed water.

Mount the print module on a vibration-free and air draught-free.

Open the cover of print module.

Remove the foam transportation safeguards near the printhead.

Connect the Print Module

The print module is equipped with a versatile power supply unit. The device may be operated with a mains voltage of
110 ... 230 V AC – 50/60 Hz without any adjustments or modifications.
CAUTION!
The direct print module can be damaged by undefined switch-on currents.

Set the power switch to '0' before plugging in the direct print module.

Insert the power cable into the power connection socket.

Insert the plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the print module are grounded.

Connect the print module to a computer or network with a suitable cable.
•
Empty core, mounted on transfer ribbon rewinder.
•
Cleaning foil for printhead.
•
Documentation.
•
CD with printer drivers.
•
Labelstar Office LITE.
English
SPX II
115