Using 2-4 Plates; Using The Exhaust Fan - KitchenAid YKHMS147H Guide D'utilisation Et D'entretien

Using 2-4 Plates

When heating food with a cook time that you set, you
casserole. When heating 4 dinner plates, switch the
plates between top and bottom when you turn them.

Using the Exhaust Fan

1. Turn on the fan and choose fan speed from 0%
to 100%.
TOUCH FAN ON/OFF
To increase fan speed, TOUCH the Upper arrow.
To decrease fan speed, TOUCH the Lower arrow.
The display screen will show "FAN" and the
percentage of the fan speed.
20
Using Your Microwave Oven
can heat two 10
(26.7 cm) plates side by
side or one dish larger
than the turntable, plus
two plates on the cooking
rack. For best results,
halfway through cooking
turn the plates halfway
around. Do the same
when heating a larger
(9 to 13 in. [23-33 cm])
FAN
ON / OFF
To heat 2 bottom plates together or one larger dish,
⁄ in.
1
4
"TURNTABLE OFF" appears on the display. PRESS to
enter setting.
1. TOUCH FIRST SCREEN pad, TURN to 2-4 Plates
and PRESS.
2. TURN to select number of plates and PRESS.
3. Arrange plates as shown on left. PRESS to Start.
NOTE: You cannot choose Turntable Off during auto
cook functions.
NOTE: If temperature from the range or cooktop below
the oven gets too hot, the exhaust fan in the vent hood
will automatically turn on at the "100%" setting to protect
the oven. It may stay on up to an hour to cool the oven.
When this occurs, the FAN ON/OFF pad will not turn off
the fan.
NOTES:
• Two seconds after the last time you touch FAN
ON/OFF, the screen returns to the previous display.
• The first time you turn on the fan after connecting the
microwave oven to power, the fan will start at speed
two. The next time the fan is turned on, it will start at
the last speed used.
2. Turn off fan when desired.
TOUCH FAN ON/OFF
the turntable should not be turning.
You can shut the turntable off by
touching TURNTABLE ON/OFF.