Philips Lumea BG9041 Mode D'emploi page 28

Problem
The results of the
treatment are not
satisfactory.
I experience discomfort
when I use the appliance.
There is no glass filter in my
attachment.
Possible cause
You have used a light
intensity setting which is too
low for you.
You did not flash an area
adjacent to an area you
treated before.
The device is not effective on
your body hair color.
You do not use the device as
often as recommended.
You respond more slowly to
IPL treatment.
You treated an area for which
the appliance is not intended
This is normal.
Solution
Select a higher setting next time.
You have to release the flashes close to
each other and there should be some
overlap between the flashes.
If you have light blond, grey, red or white
hair, the treatment is not effective.
To remove all hairs successfully, we
advise you to follow the recommended
treatment schedule. You can reduce the
time between treatments, but do not
treat more often than once every two
weeks.
Continue using the device for at least 6
months, as hair regrowth can still
decrease over the course of this period.
Only use the appliance on the
underarms, pubic area (excluding the
genital area), shoulders, chest, back and
legs.
No action required. There is no filter in
the body attachment or in the underarm
attachment. Only the sensitive areas
attachment has a specialized filter.
English
29