Skin Test; Using Your Lumea For Men; Smartskin Sensor; Body Attachment - Philips Lumea BG9041 Mode D'emploi

Masquer les pouces Voir aussi pour Lumea BG9041:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 81

Skin test

Using your Lumea for men

Smartskin sensor

Body Attachment

If you choose to wax, please wait 24 hours before using Lumea to let your
skin rest. We recommend that you take a shower before the treatment to
ensure that all possible residue of wax has been removed from your skin.
1 Pretreat the areas you intend to treat with Lumea.
2 Clean your skin and make sure it is hair-free, entirely dry and free from
oily substances.
Note: if shaving causes skin irritation, we advise you not to use the device
until skin irritation is resolved.
When you use Lumea for the first time or after tanning, perform a skin test
on each area to be treated. The skin test is necessary to check your skin's
reaction to the treatment and to determine the correct light intensity setting
for each body area.
Note: do not try the device on difficult or sensitive areas (ankle and bony
area).
1 Turn on the device. Make sure you select setting 1.
2 Place the device at a 90° angle on the skin so that the integrated safety
system is in contact with your skin.
The integrated safety system prevents unintentional flashing without skin
contact.
3 Press the flash button to release a flash.
4 Slide the device over the skin to the next area to be treated.
5 Increase the setting by one level, apply a flash and slide the device to the
next area. Repeat this for all levels, as long as each level still feels
comfortable. See the table in: 'Selecting the right light intensity'.
6 After the skin test, wait 24 hours and check your skin for any reaction. If
your skin shows reactions, choose the highest setting that did not result
in any skin reaction for subsequent use.
Each attachment of the Lumea for men has integrated skin tone sensor
which measures the skin tone at the beginning of each session and
occasionally during the session. If it detects a skin tone that is too dark for
treatment with Lumea, the 'ready to flash' light starts blinking orange and
the device automatically disables to prevent you from developing skin
reactions. This means that it does not flash when you press the flash button.
The body attachment has a curved-in design to cover effectively and treat
areas below the neckline. Especially large areas such as chest, back, legs,
arms and stomach.
English
19

Publicité

Table des Matières
loading

Table des Matières