Adjusting The Screen Size (Aspect) - JVC D-ILA DLA-X900R Manuel D'instructions

Adjusting the Screen Size (Aspect)

The screen size of the projected image can be adjusted
optimally according to the original screen size (aspect)
that has been input.
Press the [MENU] button to display
1
the menu
Select "Input Signal"""Aspect" from
2
the menu
.
Setting
4:3 Sets the screen size to 4:3. For
HD signals, the two sides are
reduced.
16:9 Sets the screen size to 16:9.
For SD signals, the two sides
are expanded.
Zoom Enlarges the entire image.
* Not selectable in the case of
HD signals.
Auto Positions the image at the
center with the entire image
enlarged.
Just Displays the input image in the
actual size.
Full Fills the entire screen with the
image with the size (aspect) of
the input image ignored.
This item is grayed out and cannot be adjusted when
0
there is no signal, signal is out of range, or during 3D
or 4K input.
Press the [MENU] button to exit
3
Input Signal
Input Level Auto
Color Space Auto
Control with HDMI Off
Aspect 16:9
Progressive Auto
Mask
3D Setting
Picture Position
Exit Operate Back
MENU Select BACK
Description
Displayed
only during
video signal
input.
Displayed
only during
PC signal
input.
Example of input image and screen size
HDMI Signal Input
Output Image
Input Image
4:3
2.35:1
(Cinema
Scope)
PC Signal Input
Output Image
Input Image
1280×1024
1920×1200
.
Setting
4:3 16:9 Zoom
.
Setting
Auto Just Full
31